mOdULe PrOgramming PrOCedUre
1
Insert key into ignition.
2
Turn key to ON position.
ON
5
Module Programming
Procedure completed.
4
Turn key to OFF position.
OFF
3
Wait, LED will turn solid GREEN
for 2 seconds.
inStaLLatiOn mOde SeLeCtiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
Page 9 of 10
ADS-TB-TL5-EN
20130318
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
Transponder Bypass
Scion/ToyoTa
Doc. No.: ##11179##
