XX-XX
PAGE X-X
XX-XX
PAGE X-X
XX-XX
PAGE X-X
ADS-AL(DL)-FM
PAGE X-X
MODULE PrOgrAMMing PrOCEDUrE
NOTE
I
Between each step, LED will turn solid RED, this is the default
standby mode.
4
Module Programming
Procedure completed.
2
Wait, LED will turn solid GREEN
then will turn OFF.
1
Press on the brake pedal and
push start button once [1x] to
START position.
ENGINE
START
STOP
x1
3
Push start button once [1x] to
OFF position.
ENGINE
START
STOP
x1
ADS-AL(DL)-FM
20
inSTALLATiOn MODE SELECTiOn
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
Page 7 of 8
ADS-AL(DL)-FM
20120316
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2012
Doorlock Interface
Ford/LincoLn
Doc. No.: ##8815##
