XX-XX
PAGE X-X
CLASSIC
PAGE 1-1
LED STATUS
DIAGNOSTICS
DURING PROGRAMMING
DURING REMOTE START
WITH IGNITION OFF
Flashing RED
Missing/wrong information from
fi rmware or vehicle
Incorrectly programmed
Incorrectly programmed or connected
Solid RED
Waiting for more vehicle information
Incorrectly programmed
Not programmed waiting for more
vehicle information
Flashing GREEN
Additional steps required to complete
programming
Correctly programmed and
operational
False ground when running status
from remote starter
Solid GREEN then OFF
Correctly programmed
Reset in progress
Reset in progress
OFF
No activity or already programmed
Invalid ground when running status
from remote starter
At rest and ready for a remote start
sequence
mOdULe diagnOStiCS
FaCtOry reSet PrOCedUre
7
Repeat programming procedure.
!
Failure to follow procedure may result with a DTC or a
CHECK ENGINE error message.
1
DISCONNECT
all connectors
from module
EXCEPT
the black
4-PIN standard or optional data
connector.
6
RECONNECT
all connectors.
2
DISCONNECT
black 4-PIN
standard or optional data
connector.
4
When LED fl ashes red,
RELEASE
programming button.
5
LED will turn solid red for 2
seconds.
RESET COMPLETED
.
3
PRESS AND HOLD
programming
button while connecting either
4-PIN standard or optional data
connector.
identiFy VeHiCLe year
1
Locate the Vehicle Identifi cation
Number (VIN) and identify the
10th character.
2
Match the VIN’s 10th character
to its corresponding year.
L > 1990
S > 1995
Y > 2000
5 > 2005
A > 2010
M > 1991
T > 1996
1 > 2001
6 > 2006
B > 2011
N > 1992
V > 1997
2 > 2002
7 > 2007
C > 2012
P > 1993
W > 1998
3 > 2003
8 > 2008
D > 2013
R > 1994
X > 1999
4 > 2004
9 > 2009
E > 2014
4
Y 1 N
5
3 A
5 T A L 8 D 5 R 0 X
Page 8 of 9
ADS-AL(DL)-CH4
20110519
install guide
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2011
ALL IN ONE
Chrysler/DoDge/Jeep
Doc. No.: ##5401##
