Installation Requirement
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDTV, and projector with
HDMI por t.
Matrix Switch unit ×1 pcs
User manual ×1 pcs
Package contents
Remote Controller ×1 pcs
DC12V2A power adapter ×1 pcs
Important safety notice
Thank you for purchasing this product. For optimum performance and
safety, please read the instructions carefully and keep the manual for
future reference.
Introduction
This product is a 4×4 H DMI HD Matrix Switch, with 4 HDMI inputs and
4 HDMI outputs. 4 HDMI inputs accommodate the simultaneous
connection up to 4 high definition video sources, such as satellite
systems and Blu-ray players. 4 HDMI outputs send the high definition
audio/video signals to 4 HDTV displays. This Matrix Switch supports
IR remote control and button control for switching inputs and outputs.
This product is perfect for security system, digital monitoring system,
school education system, exhibition center, multimedia conference,
command system etc.
Panel description
Front Panel
Back Panel
1
Power connector
(DC12V)
3
HDMI input port
2
HDMI output port
Remote Controller
This remote controller is just used for inputs
or outputs switching/selection.
1. Support
HDMI signal input and
HDMI signal output.
4
4
2. Support up to ultra HD resolution 4K×2 K@30Hz.
3. Transmission data rate up to 10.2Gbps.
4. Support IR remote control.
5. Support RS232 control.
6. Support button control for switching inputs/outputs.
7. Pure hardware design, plug and play.
Features
4
Switch:To choose input channel
3
2
Input Select indicator
IR Receiving window
1
9 Support YUV4:2:2.
.
8. Support3D.
Please read below safety instructions carefully before installation
and operation:
Please pay attention to all the warnings and hints on this device.
*
Do not expose this unit to rain, moisture and liquid.
*
Do not put any stuff into the device.
*
Do not repaire the device or open the enclosure without professional
*
person guidence to avoid electronic shock.
Make sure good ventilation openings to avoid product overheating
*
damage.
*
Turn off power and make sure environment is safe before installation.
avoid
*
Do not plug-in/out the connection cables when it is in using to
cables damage.
*
Use DC12V only. Make sure the specification matched if using 3rd party
DC adapters.
Wall-mount kit
x2pcs
IR
RS232 serial port cap ×1pcs
1
2
3
1
3
2
RS232 serial port
4
