iDance XD25, Instruction Manual

Page: 10 / 10

9
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE AND
SOLUTION column to locate and fix the problem.
SPECIFICATIONS
Specifications are typical, individual units might vary. They are subject to continuous
improvement without notice and without incurring any obligation.
PROBLEM POSSIBLE CAUSE AND SOLUTION
Noise on speaker output
when
microphone is
connected and turn on
XD25
Make sure your microphone or microphone cable is in good
condition, grounded and shielded. Internal gain of voice
processing could cause vibration from poor ground noise.
Bluetooth cannot connect to
XD25

Make sure no other device from your friend or family is
connected to XD25 . When XD25 Bluetooth is connected,
press BLUETOOTH button would stay ON. So make sure
XD25 indicating Bluetooth is ready to connect. Also make
sure your smartphone / tablet is located close to
XD25 less than 2 meters when pairing.

Hold the BLUETOOTH button to reconnect again.
Intermittent Bluetooth music
streaming
The wireless Bluetooth distance of
XD25 is about 7-l0 meter
in open area. Below conditions could block you Bluetooth
signal and please ensure you would get rid of those:

Metal protection on case for your phone/tablet
 Metal or wall is blocking in between your phone/tablet
and XD25
 Another Bluetooth device is working close to XD25
No sound on selected
source
 Ensure that the XD25 is powered ON

Check the master volume on the XD25
 Check the volume level on paired Bluetooth device

Remove the power adapter / connection cable and
reconnect again.
AC ADAPTER
AC Input :AC~ 100-240V 50/60Hz
DC Output =
15V , 2000mA
USB Output
DC Output = 5V, 1A
SOUND SOURCE INPUT
Bluetooth, Aux in, Microphone
Total Harmonic Distortion Below 10%
Signal to Noise Ratio Over 41dB
Master Power Output
13W X 2 RMS
Speaker 4 Inch 8 Ohm 20W