Installation
1. Connect the terminated power wire of the cable directly to the AC or DC power source.
2. Connect the BNC output of the Camera to an extension cable, or directly to
a DVR / Observation System or to a TV/Monitor.
3. Fix up the pedestal on the ceiling, fix up the screw of pedestal.
4. Aim and adjust the “Field of View” as desired, then fix up the screw of horizontal angle.
5. Next, choose a satisfactory angle at which to aim the camera then connect the
screw of declining angle.
Push the Joystick up / down to select among menu items.
Push the Joystick left / right to adjust the level of the selected item.
Press the Joystick to enter the submenu or exit the OSD Setup Menu.
Note:
The function button is not only for direction control, also for switch video output mode. Please follow the
detailed instruction as below:
Push the joystick "UP" button key 5 seconds to AHD mode
Push the joystick "DOWN" button key 5 seconds to CVI mode
Push the joystick "LEFT" button key 5 seconds to TVI 2.0 mode
Push the joystick "RIGHT" button key 5 seconds to CVBS mode
Note:
Each boot only switch video mode once, if you need to switch again to reboot it again:
Troubleshooting
1. No picture or unstable - Check the connection for video cable and/or power cable.
2. The image is so blurred
1) Check if there is some dirt on the lens, then use customized lens paper or
OSD:
Yes
Minimum Illumination:
0 LUX (IR ON)
S/N Ratio:
More than 52 dB
Distance:
100-115ft
LED:
36 PCS LED
Video Output:
TVI / CVI / AHD / CVBS
Connector video:
BNC
Operation Temperature:
-4°F to +122°F
Supplied Power:
12VDC(+/-10%);
