ID TECH VP5300M User Manual
Page | 5
The VP5300M supports USB and serial (RS-232) host communication using the command protocol
defined in the
NEO 2 Interface Developers Guide
. This comprehensive guide describes all the firmware
commands and other features available in ID TECH's NEO-series devices; it is the authoritative source
for technical information of interest to systems integrators. Contact your ID TECH representative to
obtain a copy of this guide, which is available under NDA. Note, also, that a feature-rich, Windows-
based Universal SDK is available to aid in rapid development of applications that talk to the
VP5300M.
Be sure to check the
on the ID TECH Knowledge Base for the latest VP5300M
demos, utilities, SDK updates, white papers, and other downloads, all of which are freely available
without registration.
NOTE:
The VP5300M requires the use of an external 12V DC power supply; it cannot run on USB port
power alone. When other peripherals are connected to it, such as an NFC antenna, the VP5300M
powers those peripherals.
1.1.
Features
The VP5300M supports the following features:
•
Contactless: ISO/IEC 14443 Type A and B
•
PCI-PTS 5.x certification with SRED
•
Tamper responsive (with automatic zeroization of keys in the event of tamper)
•
MSR reads up to 3 tracks of data (Bi-Directional), with JIS-I and JIS-II support
•
ICC reader with landing contact
•
Contact and Contactless EMV Level 1 certified
o
Contact EMV Level 2 certified, using ID TECH's proven Common Kernel
o
All major Contactless kernels supported
•
State-of-the-art encryption support
o
Triple DES
o
AES
o
TransArmor RSA
•
Support for DUKPT key management (with 15 DUKPT slots) of data and/or MAC keys
•
NGA Key Injection Protocol
•
TR34 Remote Key Injection Protocol
•
32 Key slots supported
•
Optional contactless (NFC/RFID) antenna
•
Mechanical and optical combination front switch
•
Plastic bezel with a gate
•
Dedicated RS232, USB, and Ethernet ports (for data communication)
•
Dedicated DC 12 to 24V power input
•
LAN with network function 2 colored LEDs for link state and speed indication
•
Audio feedback for MSR, contact EMV, and contactless transactions
•
RoHS 2, and REACH compliance
