ID Tech MD22292B, User Manual

Page: 21 / 57

Chapter 2. Hardware setup
3
Chapter 2. Hardware setup
This chapter describes the following:
•
The location of the controls, switches, and connectors.
•
The procedure for setting up the monitor (page 4).
Locations
Front view
Rear view
Note:
If it is desired to operate the monitor in the portrait position, mount
the monitor on a stand meeting the VESA FPMI standard and rotate the
monitor clockwise such that the controls are located in the bottom left
position.
OSD control
Brightness control
Power switch
Power light
(Power on/Standby)
Base stand
Serial number label
Monitor screen
DC-IN connector
Video connector
Security keyhole
Stand rear cover
Cable clamp
Cable hook
VESA FPMI mounting points (4x)
Connector cover