® Waves System
V 2.0 - 2015
I.D. AL - NanoPlayer box - MP3 & Wav audio player - User manual
- 7 -
Amplifier
L+ / L-
R- / R+
Trigger input
In
G
Speaker Output:
The NanoPlayer
box includes a built-in amplifier. The
board can therefore be connected
directly onto speakers. Connect the
speaker wires onto the output of
each of the 2 channels.
Caution: Never connect outputs
between themselves, do not create
short-circuits and do not use
speakers with lower impedance
than specified in the player
specification.
Audio Output:
on the
line level stereo output,
connect an amplifier,
sound system, mixer or
any device providing a
line level input.
Input on dry contact:
Connect a push button, presence
detector, smoke, heat, light or pressure sensor ... relay output,
or any type of contact to trigger the player when happening of
an event. Create a brief contact between «SW» input and the
ground G.
Speakers
Power supply 12v
Internal input schematic
Speakers
Cables are wired on the
removable connector.
