® Waves System
V 2.0 - 2015
I.D. AL - NanoPlayer box - MP3 & Wav audio player - User manual
Appendix A - Characteristics
Power supply:
• Nominal voltage: 12V DC
• Power supply range: 10V to 15V DC
Consumption on 12V power supply:
• Reading (line level output - amplified output not used): 70mA
• Reading - amplifier maximum @8Ohms: 2A (varies with volume level)
Output audio power:
• Voltage 12V - THD 1% - Load 4 Ohms : 2 x 13W
• Voltage 12V - THD 10% - Load 4 Ohms : 2 x 16W
• Voltage 12V - THD 1% - Load 8 Ohms : 2 x 8W
• Voltage 12V - THD 10% - Load 8 Ohms : 2 x 10W
• Headphone output : 2 x 250mW
Dimensions:
• Width: 75mm - Height: 25mm
• Depth without connectors: 110mm - With connectors : 125mm
Weight:
110g
Appendix B - Functions
Audio characteristics
• Reads stereo MP3 files (MPEG ½ layer 3), 16bits 44.1KHz, from 32kbit/s to 128kbits/s
• Reads CBR (Constant Bit Rate) files and VBR (variable Bit Rate) files
• Reads stereo Wav files, 44.1kHz, 16 bits (Wav broadcast not supported)
• Volume setting = 32 steps
SD Memory card
• Accepts SD card - 64MB minimum - Formatted in FAT16 and FAT32
• Accepts SDHC card - 4GB minimum - Formatted in FAT32
• Supports long file names
• 999 files maximum
Interfacing
• Status indicator LED
• Infrared sensor - Play, Stop, Next, Previous, Trigger, , Volume -
Protocole SONY SIRC 12bits modulated at 38kHz
• 1 input on dry contact on Phoenix 3.81mm plug-in connector
• External power supply connector DC 2.1/5.5 and internal
• Stereo output on mini-jack
• Amplified stereo output on terminal block
• Two headphone outputs on mini-jack
Directory trigger by:
• 1 input on contact - Bounce management 100ms fixed
• Infrared remote control
Encryption of MP3 files
• Compatible with encryption software tool v1 or v2. On request
- 13 -
