® Waves System
V 1.0 - 2018
ID-AL - Micro AMP 4 mkII and Micro AMP 4/2 - Headphone amplifier - User manual
A.6 - Terms of use:
• This product has been designed for indoors use only.
• If this device has been exposed to very high temperature fluctuations (e.g.: after transportation), do not
connect it immediately. The condensation formed inside the device could damage it. Allow the device to
attain ambient temperature before connecting it.
• Do not shake the device, avoid sudden movements during its installation or handling.
• When selecting the spot for installation of the player, ensure that it is not exposed to a high source of heat,
humidity or dust. There should not be any cables lying around as they might jeopardise your & others safety.
B. PRODUCT INFORMATION
B.1 Correct usage
The Micro AMP 4 mkII and Micro AMP 4/2 are audio amplifier to be used with audio headphone.
Correct usage involves compliance with the instructions given in this manual as well as with the requirements
concerning installation.
B.2 Incorrect usage
Any other usage or usage beyond the scope of this application is considered as incorrect usage. The
manufacturer shall not be liable for the damages ensuing from it. The user shall bear full responsibility
for the risks incurred.
B.3 Delivery details
- Micro AMP 4 mkII or Micro AMP 4/2
- External power supply and its power supply cable
- User manual
B.4 Specifications
Models: Micro AMP 4 mkII or Micro AMP 4/2
Nominal electrical values of the power supply connection:
Voltage (V) 100 to 240
Frequency (Hz) 50-60
For details see Annexe B
B.5 Installation
The device must be installed in a dust free area.
Do not install the device directly against a wall. To avoid overheating, the ventilation openings must
not be blocked. Take care to leave an empty space above the ventilation slits.
B.6 Electrical connection
Before activation, check whether the mains voltage matches with the voltage indicated on the rating plate.
sur la plaque signalétique.
- 3 -
