® Waves System
V 1.0 - 2018
ID-AL - Micro AMP 4 mkII and Micro AMP 4/2 - Headphone amplifier - User manual
This device, made by Waves System, has been designed in a way that practically eliminates any risk if it
is used in accordance to its intended purpose. Nevertheless, with a concern for safety, we would like to
draw your attention to the following instructions:
• When using the device, comply with all local rules and regulations in force. Any modification or conversion
of the device automatically entails loss of the homologation. The operation of a modified device is liable
to a penalty. In the interest of occupational safety, the operator and the user are held responsible for
complying with the regulations.
• Keep the original packing for a possible product re-shipment. Also ensure to keep the packing material out
of children’s reach. Only this original packing ensures optimal protection for the product during transportation.
If a product reshipment appears to be necessary during the guarantee period, Waves System is not liable
for any ensuing damages arising during the transportation and attributable to a defective packing.
• This device is used to broadcast video and audio files. It should be used only by persons whose training
or knowledge ensures proper handling.
• Before every use, the operator must check that the device is in perfect working condition.
• This product must not be used in places where there is a potential explosion risk. Besides, it must neither
be used in an environment favouring combustion nor in a humid or excessively hot or cold location.
A.5 Safety instructions against risks due to electric currents
• The device must be connected to a grounded AC power outlet or a European standard outlet installed
as per good professional practices.
• Before connecting the device, check that the power supply voltage and frequency match the specifications
indicated on the device.
• Before powering, check that the device and cables are not damaged. Damaged cables and connections
must immediately be replaced.
• Never allow the power cords to come in contact with other cables. Handle the power supply cable as well
as all other cables connected to the mains with extreme care.
• Always connect the plug-in connector in the end. Ensure that the On/Off switch is in ‘Off’ position before
connecting the device to the mains. The mains outlet must remain accessible after the installation.
• Check the device and its power supply cable from time to time. Disconnect the device from the mains
when it is no longer used or for the purpose of maintenance.
• Handle the power cord by using the plug-in connector only. Never remove the plug-in connector by
pulling the power cord.
• Electrical connection, repairs and maintenance must be carried out by qualified personnel.
• Do not switch on or switch off the device within a short span of time as this will reduce equipment life.
- 2 -
