Icy Dock MB662 Series, User Manual

Page: 8 / 64

English
7
1.
It is better to use the same hard drive brand and memory capacity to use the RAID functions.
2.
When using a MB662US-2S with an eSATA connector to set JBOD function, if the host
cannot support port multiplier function, the computer may not be able to detect 2 hard
drives simultaneously. (You may need to purchase the optional port multiplier eSATA
controller card to get the enclosure working properly)
3.
It takes about an hour to rebuild a 100GB hard drive
.
6-3. RAID notification
MB662UEAB-2S LED Status
MB662US-2S LED Status
Status
HDD Access Flashing Purple LED
No HDD in Position LED blinking in Blue
&
Red
HDD Failure LED blinking in Blue & Red
Rebuilding
Purple LED (Source Drive)
LED blinking in Red & Purple (Target Drive)
Rebuilding Verifying
Blue LED (Source Drive)
Purple LED (Target Drive)
HDD Idling Blue LED
Status
HDD Access Flashing White LED
No HDD in Position Red LED
HDD Failure Red LED
Rebuilding & Verifying
LED blinking in White & Blue (Source Drive)
LED blinking in White
&
Red (Target Drive)
HDD Idling White LED