Manual IB-DK4027-CPD
Configure a display device
Please setup your display settings accordingly to your operating system and requirements.
For detailed information, see the corresponding operation manual and description of your
operating system.
Supported video resolutions
The DockingStation supports:
•
Ultra HD resolution via HDMI
®
if the connected HDMI
®
display supports it.
•
Full HD resolution via VGA if the connected VGA display supports it.
Number of displays
Video output configuration
Maximum resolution/monitor
1 HDMI
®
3820x2160@30 Hz
1
VGA
1920x1080@60 Hz
2 (Only Mirrored)
HDMI
®
+ VGA
max 2x 1920x1080@60 Hz
Usage of memory card slots
SD card
Insert the SD card into the SD card slot with the bevelled corner in front of it. The golden
PIN’s of the card must be directed
downwards
(blue LED at the top).
microSD card
Insert the microSD card into the microSD card slot with the bevelled corner in front of it. The
golden PIN’s of the card must be directed upwards (blue LED at the top).
Single-LUN
- the card reader can only work with one memory card at a time
Note:
In order to power and charge your connected laptop, its USB Type-C
®
port must
support USB Power Delivery or Thunderbolt
™
3.
Important
1.
When connecting the USB Type-C
®
plug of the IB-DK4027-CPD to a Chrome-
book
™
, the mouse to be connected to the USB 3.0 Type-A port will not work
immediately; it will have seconds’ delay. This problem also occurs with other similar
Type-C
®
adapters (including Apple original 3 in 1 adapter) when connected with
Chromebook
™
.
2.
Attention
! When plugging in and out a Power Delivery adapter to the Type-C
®
interface of the IB-DK4027-CPD, the connected USB devices will get disconnected
flashily and then reconnect within a few seconds. In order to prevent possible data
loss or corruption, avoid disconnecting the Power Delivery adapter from AC power
while transferring data.
