ROTISSERIE SHAFT & SKEWER RACKS
1.
Place the two Skewer Racks at each end of the Rotisserie Shaft. Make
sure the Set Screws are on the outer side of the Rotisserie Shaft.
2.
Slightly tighten Set Screws. Do not over tighten as you may need to
adjust the tightness after you insert the Skewers.
3.
Carefully poke Skewers through food.
ROTISSERIE SPIT ASSEMBLY
1.
Insert each Skewer point through holes on the left Skewer Rack (FIG. C).
2.
Squeeze the clip-end of each Skewer as you insert into the opposite
Skewer Rack slot to secure.
3.
Release clip to securely rest in slot as shown (FIG. D).
4.
Repeat process 3 through 6 in a uniform manner around the Skewer Rack.
Make sure Skewers are evenly spaced.
5.
Tighten the Set Screws to make sure they are securely in place.
6.
Use caution while inserting the Spit into the Unit to prevent getting poked
by the Skewer ends.
