6-4 RECORD Setup
1) RECORD SETUP
To set the recorder configuration.
•
CHANNEL: Channels of the 4-camera groups.
•
QUALITY : Recording quality of the selected
channels of 4-camera group.
•
FPS : Frames per second
P
Al
: R
d d t 0 5
d b f
th
•
Pre Alarm : Record data 0~5 seconds before the
alarm occurs
•
*Notice : In case of sudden power off while in
Pre-Alarm mode, up to 5 seconds of data loss
may occur.
•
Click OK to save this setting.
•
Click DEFAULT to return to the original setting.
2) MOTION
The Menu for DVR Motion Detection Programming.
•
Select CHANNEL
•
SENSITIVITY : sensitivity LOW ~ VERY HIGH
•
MOTION DURATION: The time duration of motion
detection.
•
MASK ZONE : Click MASK ZONE to select or clear
blocks.
•
Click OK to save this setting.
•
Click DEFAULT to return to the original setting
3) SCHEDULE
Click DEFAULT to return to the original setting.
To Set the Schedule Recording Mode.
•
Appoint Schedule recording by Day and Hour
Appoint Schedule recording by Day and Hour.
•
MOTION, ALARM, ALARM or
CONTINUOUS recording mode selectable.
Note: In case of emergency, click the Panic button
which will start recording at CONTINUOUS MODE
at the highest resolution. Unless otherwise
specified, it records according to this Schedule
Record Setup.
34
Record Setup.
•
Click OK to save this setting.
•
Click DEFAULT to return to the original setting
