2) Dynamic IP of Cable Method
Select DYNAMIC IP from DVR’s TCP/IP SETUP and an IP address will be assigned from ISP’s
DHCP server.
1) Verify if the IP address is OK with your PC before connecting DVR.
2) Connect the dynamic IP LAN cable to DVR after verification.
3) Turn off Modem provided by ISP company, and turn it on again.
(This process is to reset client’s MAC from ISP company. Wait for 30 sec after turning it on.)
4) When modem functions properly turn off DVR and turn it on again
4) When modem functions properly, turn off DVR and turn it on again.
5) Enter into [MENU]-[NETWORK SETUP]-[IP CONFIG].
6) Select DYNAMIC IP and click refresh button.
7) Exit MENU.
8) Verify if the MAC address starts with 00-0A-A2….
9) Set IP port in CONNECTION SETUP. (50000 recommended)
10) Access the DVR with Transmitter Program.
* If access via Transmitter fails, check 1), 3) & 4) again.
If access via Transmitter fails, check 1), 3) & 4) again.
3) Dynamic IP of PPPOE Method
Enter PPPOE setting in the DVR
’
s TCP/IP SETUP
1) Verify if the IP address is OK with your PC before connecting the DVR.
2) Connect the dynamic IP LAN cable to DVR after verification.
3) Turn off Modem provided by ISP company, and turn on again.
)
p
y
p
y,
g
(This process is to reset client
’
s MAC from ISP company. Wait for 30 sec after turning on.)
4) When modem functions properly, turn off DVR and turn it on again.
5) Enter into [MENU]-[NETWORK SETUP]-[PPPOE].
6) Input the ID & PASSWORD assigned from ISP
7) Exit MENU.
8) Verify if the MAC address starts with 00-0A-A2
…
.
9) Set IP port in CONNECTION SETUP (50000 recommended)
9) Set IP port in CONNECTION SETUP. (50000 recommended)
10) Access the DVR with Transmitter Program.
* If access via Transmitter fails, check 1), 3) & 4) again.
44
