4) ALARM
To program an alarm sensor connected to DVR.
•
Set input type and dwell time for each channel.
•
Select between N.O. and N.C. (Normal Open : NO,
Normal Close : N.C.)
•
Click OK to save this setting.
•
Click DEFAULT to return to the original setting.
5) PTZ SETUP
To Program a PTZ Camera.
•
CHANNEL : Selection connected PTZ
•
PROTOCOL : Selection Camera Model
•
ID: ID Value for PTZ Camera
•
BAUD RATE : PTZ SIGNAL Transmit rate
•
PAN : Horizontal movement Speed
•
TILT : Vertical movement Speed
•
ZOOM : Zoom In/Out Speed
•
FOCUS : Focus Near/Far Speed
•
Click OK to save this setting.
Click DEFAULT t return t the riginal setting
6) EVENT POPUP
•
Click DEFAULT to return to the original setting.
To Program an Event Popup.
•
Select the camera channel
•
Select POPUP On or Off
•
EVENT : Check the checkbox of MOTION and/or
ALARM
•
Dwell Time : The period of time for the popup in
case of Event.
•
Click OK to save this setting.
37
g
•
Click DEFAULT to return to the original setting
