Restart Device
Use this option to restart the module.
Device Information
The device information page displays the serial number, hardware revision and firmware versions of the network
repeater, as well as statistics such as the status of the COM ports and the bytes that have been successfully
repeated since the last power cycle.
This page is also used to upgrade the module's firmware by putting the device into boot mode then transferring a
firmware file to the device by TFTP.
User Management
The module comes with two default users:
Username
Password
admin
admin
user
user
When logged in as admin, the operator can access all pages and change any parameter. In comparison, the user
account permits access to the main (home) and device information pages.
To edit a user, click on the appropriate checkbox, then click
Edit
. This opens a new page where the user settings
can be changed.
For security reasons, we recommend you change the password of the admin user before deployment.
PRT-MNR2-DIN | Protege Module Network Repeater | Installation Manual
19
