Network Repeater Configuration
Configuration of the network repeater is carried out using the built-in web interface. To access the web interface,
open an internet browser and type the IP address of the network repeater into the address bar.
The default IP address is
192.168.1.3.
If the current IP address is not known it can be temporarily set to
192.168.111.222
by linking the N+ N- NA and NB
connections between the COM1 and COM2 ports, then cycling power to the device.
Defaulting the IP Address:
NB NA N- N+
COM3
POWER
STATUS
FAULT
ETHERNET
COM2
NB NA N- N+
COM2
COM3
COM1
ETHERNET
N+ N- NA NB
12VDC IN/OUT
RS 485 NETWORK
When attempting to view the web interface from a network that uses a proxy server, ensure the browser
connection options are configured to recognize local addresses.
Logging in for the First Time
1.
Open a web browser and enter the default IP address of
192.168.1.3
2.
Enter the default operator login of
admin
with the password
admin
.
For security reasons, this password should be changed before deployment.
3.
Click
Sign In
.
Configuration
Programming the IP address, subnet mask, and default gateway requires knowledge of the network and subnet
that the system is connected to. You should always consult the network or system administrator before
programming these values.
PRT-MNR2-DIN | Protege Module Network Repeater | Installation Manual
17
