ICT Protege PRT-KLCS, User Manual

Page: 13 / 18

PRT-KLCS Protege Touchsense LCD Keypad | April 2014
13
Alarm Memory
Alarms can be stored in the event log and in the alarm memory of the area the alarm was activated in.
This option must be enabled by your installer.
Viewing Alarm Memory
Select the Alarm Memory menu by pressing [MENU, 5, 1]. Use the [UP] and [DOWN] keys to view the areas.

If the area has alarms in its memory, the keypad generates a rejection tone and displays the memory
message.
Warehouse
*Alarms In Mem*

To view the first item stored in the alarm memory press the [ENTER] key.
Had alarm on
Roller Door

The area that the alarm occurred in is then shown. If a tamper alarm has occurred, the first line states that it
was a 24HR alarm.
in AREA
Warehouse

If the Acknowledge Alarm Memory option has been enabled by your installer, press the [ENTER] key to
acknowledge the alarm and remove it from the list.
We recommend you always take note of the alarm before acknowledging or clearing the alarm memory
Press [ENTER] to
acknowledge

Press the [DOWN] key to view the next item stored in the alarm memory.
Press [

] to show
next item

Once finished, press the [MENU] key to exit the view mode.
Press [MENU] to
exit view mode