Reader 1/Reader 2 Indicators
The reader 1 and reader 2 indicators display the status of the data being received by the onboard readers.
State
Description
Short Flash
(red)
A short
flash
(<250 Milliseconds) on the reader 1/reader 2 indicators will show that data was
received but was not in the correct format.
Long Flash
(red)
A long
flash
(>1 Second) indicates that the unit has read the data and the format was correct.
Input Indicators
Whenever an input on the module is programmed with an input type and area, the input status will be displayed
on the front panel indicator corresponding to the physical input number. This allows for easy test verification of
inputs without the need to view the inputs from the keypad or the Protege software.
State
Description
Constantly off
Input is not programmed
Constantly on (red)
Input is in an open state
Constantly on (green)
Input is in a closed state
Continuous flash (red)
Input is in a tamper state
Continuous flash (green)
Input is in a short state
PRT-HRDM-DIN | Protege Half DIN Rail 2 Door Reader Expander | Installation Manual
25
