ELECTRIC BICYCLE METER KT
—
LCD7C Product User Manual
- 29 -
1
Default value-1.5V
Default
value-1.5V
Default
value-1.5V
2
Default value-1V
Default value-1V
Default value-1V
3
Default value-0.5V
Default
value-0.5V
Default
value-0.5V
4
Default value 20V
Default value
30V
Default value
40V
5
Default value+0.5V
Default
value+0.5V
Default
value+0.5V
6
Default value+1V
Default value+1V
Default value+1V
7
Default value+1.5V
Default
value+1.5V
Default
value+1.5V
C12 default value is 4, namely, controller minimum operating voltage (voltage
shortage value); when setting is 5, the default value plus 0.5V, when setting is 4, the
default value minus 0.5Vand so on.
After finishing C12 parameter setting, press
button
(SW)
to save the current set
values and enter C13 parameter setting interface.
○
C13 ABS brakes of the controller and parameters of anti-charge control Setting
Enter into C13 parameter setting interface, C13 parameter bar flashes.
C13 parameter setting interface
C13 is ABS brakes of the controller and parameters of anti-charge control setting, the
default value is 0 with the setting range between 0-5, press
(UP) button or
(DOWN) button to make selection.
