ELECTRIC BICYCLE METER KT
—
LCD7C Product User Manual
- 28 -
2
As data source for copying parameters, the meter transfers to second display.
C11 selects 2, hold
(SW) for about 2 seconds to exit the setting environment,
and then the meter is served as data source for copying parameter (see parameter copy),
there’s So 2 logo on display interface.
Data Source Display Interface
After finishing C11 parameter setting, press
button
(SW)
to save the current set
values and enter C12 parameter setting interface.
○
C12 Controller Minimum Voltage Adjustment Setting
Enter C12 parameter setting interface, C12 parameter column flashes.
C12 parameter setting interface
C12 is controller minimum operating voltage adjustment setting (tiny adjustment of
voltage shortage), the default value is 4, and the setting range is 0-7, press
button
(UP)
or
button
(DOWN)
for selection.
C12 parameter definition table
:
C12 value
Minimum Voltage(V)
24V Controller
36VController
48VController
0
Default value-2V
Default value-2V
Default value-2V