Holding the
Output Select
button for 2 seconds at any screens will return you to the main screen.
Holding the
Output Select
button for 20 seconds at any screens will reset the password (see
Password
Reset
section).
The backlight of the LCD turns off if the
Output Select
button is not pressed for 15 minutes. Press the
Output Select
button to turn the backlight back on.
MAIN SCREEN
Line 1: Displays the name of the panel, which is customizable through the web-based configuration
utility.
Line 2: blank
Line 3: Displays the system voltage. Voltage display will blink if the system voltage exceeds the
Under-Voltage or Over-Voltage Thresholds set on the
Alarm Setup
page.
Line 4: Displays the system current. Current display will blink if the system current exceeds the
Over-Current Threshold set on the
Alarm Setup
page.
NETWORK SCREEN
Line 1: Displays the network status.
Line 2: Displays the connection type.
Line 3: Displays the IP address assigned to the panel.
Line 4: Displays the MAC address of the panel.
OUTPUT SCREEN (1 – 12)
Line 1: Displays the name of the load, which is customizable through the web-based configuration
utility.
Line 2: Displays the output status.
ENABLED
for output enabled,
DISABLED
for output disabled,
and
FUSE OPEN
for blown or missing fuse.
Line 3: Displays the output voltage. Voltage display will blink if the voltage exceeds the Under-Voltage
or Over-Voltage Thresholds set on the
Alarm Setup
page.
Line 4: Displays the output current for that individual output.
7
Summary of Contents for ICT180-12IRC
Page 2: ......