BLUETOOTH MODE + PUSH
BLE 2AMDI511VPVRDBS WIRING - FIGURE N. 6
In order to activate this mode of control/operation it is necessary to install the IoT Light App on the Android or iOS
device that you want to use for the 2AMDI511VPVRDBS dimmer control and disconnect any 0-10V (1-10V) inputs
or potentiometer connected to the dimmer.
The implemented features are:
Switching on and off and the brightness level control of each individual light point.
Ability to group together and control several light points with just a simple command.
Creation and recall of your favourite lighting sceneries.
The system management from a single simplified user interface.
THE BLUETOOTH LE CONNECTION DOES NOT REQUIRE PAIRING PROCEDURE
IoT Light App features (* depending on the device only some functions may be available)
Dimmer management at 1 or 4 channels with different modes of operation:
- Mono channel
- 4 synchronized channels
- RGB (3 channels or 3 zones)
- RGB + White (4 channels or 4 zones)
- Dynamic White
The dimming level is saved when the app is closed or the devices are disconnected from the Bluetooth
smartphone.
To reset the password for the Newlab Go APP, press and hold the external control button for 30 seconds.
The default password is 1234.
11
IOTLIGHT - User Manual 2AMDI511VPVRDBS
