10
INSTALLATION
(CONT’D)
Wiring Termination Diagram
The IntelliControl ICS Keypads connect to an In-
telliControl ICS Modular MultiZone Receiver via
CAT-5 cable. For the system to function properly,
all runs of CAT-5 must be pulled, in home-runs,
from each keypad location to the system head end
where the MultiZone Receiver and other system
components will be located.
The runs of CAT-5 must be terminated with RJ-45
connectors using the T-568A pinout configuration
as follows:
� � � � � � � � � �
� � � � � � � �
�����
������
� � � � � � � � � �
� � � � � � � �
������
�����������
Pin#
Descrip.
Color Code
1
TX+
White/Green
2
TX–
Green
3
RX+
White/Orange
4
IR Signal
Blue
5
IR Ground
White/Blue
6
RX–
Orange
7
UI Power
White/Brown
8
UI Ground
Brown
Note: TX+ = transmit, RX+ = receive, UI = user interface.
Figure 7:
IntelliControl ICS RJ-45 pinout checklist.