Fig. 4 — Installation of Dust
Director onto Mounting Brackets
Fig. 5 — Adjust the
saw’s blade guard to the
top of the Dust Director.
Installation of Dust Director / Leg Assembly to the Mounting Brackets (Fig 4)
• Align the oval slots (4) of the Dust Director / Leg Assembly to the threaded holes
on the front and rear mounting brackets.
• Using the provided 1/4-20 x 1" hex cap bolts and flat washers (4), use a 3/16" allen
wrench to tighten the Dust Director / Leg Assembly to the Mounting Brackets.
Slightly adjust or align the Assembly to the center line of the blade. Once
positioned, securely tighten the hex cap bolts (4) into the brackets.
Final Adjustment — IMPORTANT:
Rotate the saw’s blade guard
to the top of the Dust Director’s guard (Fig 5).
14" Gas
DUST DIRECTOR
®
US Patent US 6,648,742 B1
OPERATING, INSTALLATION, SAFETY / WARNING
INSTRUCTIONS, WARRANTY
Please visit the
Dust Director
Web Site for More & Exciting New Products for
Concrete & Masonry Restoration:
www.dustdirector.com
Dear Customer: Many thanks for the confidence you have shown in us with the purchase of our 14" GAS DUST DIRECTOR. Many years of working with
contractors on their construction sites: understanding their needs, requirements and health concerns went into the design of this product. When used with
a Dust Director Vacuum - specific for vacuuming silica dust - the 14" GAS DUST DIRECTOR promotes a cleaner, healthier and more productive
construction site.
OPERATING / SAFETY INSTRUCTIONS.
Buyer acknowledges receipt of these Operating & Safety / Warning Instructions for Use of the Product and agrees
to strictly comply with such instructions.
PRODUCT USE / DESIGN APPLICATION.
Cutting through masonry, concrete and stone material where containment
of airborne dust is critical. Product is only for use by a licensed contractor who understands these instructions, as well as being throughly trained and
experienced in the use and operation of cut-off saws when cutting through the stated materials. Buyer acknowledges receipt of these Operating & Safety /
Warning Instructions for Use of the Product and agrees to strictly comply with such instructions. Buyer is responsible for determining whether the product is
fit for a particular purpose and suitable for user’s method of application.
LIMITED WARRANTY / LIABILITY.
Distributed by Industrial Contractors Supplies.
Made In USA.
Seller warrants it has title to the product delivered and
may properly sell the same to Buyer and that such Product will conform for use as intended and as described more fully in these attached Operating and
Safety Instructions and Warnings for use of the Product. SELLER MAKES NO OTHER WARRANTY OR REPRESENTATION, EXPRESSED OR IMPLIED,
CONCERNING THE PRODUCT OR ITS MERCHANTABILITY, FITNESS THEREOF FOR ANY PURPOSE, OR ITS NON-INFRINGEMENTS. Seller shall
not be liable for special, indirect, consequential or punitive damages of any kind under this Agreement or otherwise, whether or not caused by its
negligence, and assumes no risk whatsoever as to the result of the use of Product either singly or in combination with other material. Buyer represents that
it is familiar with the characteristics of Product and assumes all responsibility and liability for and will indemnify and hold Seller harmless from any and all
loss or injury to persons or property arising out of handling, use or possession of Product delivered to it. IN THE EVENT THAT THIS DISCLAIMER OF
LIABILITY IS HELD BY A COURT OF COMPETENT JURISDICTION NOT TO APPLY TO BUYER, SELLER’S MAXIMUM LIABILITY TO BUYER ON ANY
CLAIM IN ANY WAY CONNECTED WITH THE SALE OR USE OF ANY OF THE PRODUCTS, WHETHER LIABILITY ARISES IN CONTRACT, FROM
BREACH OF WARRANTY, IN TORT OR OTHERWISE, SHALL BE LIMITED TO THE PRODUCT’S INVOICE PRICE.
CLAIMS.
Any claims by Buyer must be received by Seller in writing within 20 days of the date of delivery or non-delivery. Failure to deliver notice of claim
to Seller within such 20 day period will constitute a waiver Buyer of all claims in respect of such delivery or non-delivery.
IMPORTANT SAFETY NOTES:
1.
FINGERS
and HANDS MUST BE KEPT AWAY from BOTH CUTTING “EDGES” of the DIAMOND BLADE
2.
STAY ALERT, WATCH WHAT YOU ARE DOING, AND USE COMMON SENSE WHEN OPERATING THE 14" GAS DUST DIRECTOR. A
moment of inattention while operating the may result in serious personal injury
3.
DO NOT TOUCH THE “HOUSING” OF THE 14" GAS DUST DIRECTOR
-
Do not force the tool when cutting
4.
Use the right diamond blade for the application:
INDUSTRIAL CONTRACTORS SUPPLIES
recommends using the following (and included) 14"
DUST DIRECTOR BLADE for use with the 14" GAS DUST DIRECTOR (blade P/N: DD1412U). This blade has been designed specifically for
use with the 14" GAS GAS DUST DIRECTOR to match the saw’s safe RPM speed while providing a fast, smooth cut - through the
hardest
of
materials.
5.
Please read and understand the information contained in these Operating Instructions.
CAUTION
: Before any use, be sure that everyone using the 14" GAS DUST DIRECTOR reads and understands all the Operating and Safety instructions
and all other information contained in this manual. SAVE THESE INSTRUCTIONS AND REVIEW THEM PRIOR TO EACH USE AND INSTRUCTION TO
OTHERS. Do not attempt to install, start or operate the 14" GAS DUST DIRECTOR until all the instructions have been read and understood by the
operator.
Failure to do so could result in personal injury and/or property damage. No person should attempt to operate the 14" GAS DUST DIRECTOR
without first being trained in the operation of industrial cutting tools. These instructions are not intended as a substitute for training and experience. Any
user of the 14" GAS DUST DIRECTOR should be thoroughly familiar with safety rules and regulations of portable grinders and diamond blades before use
of this tool
