![background image](http://html1.mh-extra.com/html/ics/890f4/890f4_operators-manual_3559215002.webp)
© 2017 ICS®, Blount International Inc. REV072517 P/N 566594
890F4 OPERATOR MANUAL
2
E
N
G
LI
S
H
This instruction manual contains translations of a manual drafted in English
and are provided to assist those who do not speak English as their first
language. Being a technical writing, some terms may not have a like or
equivalent meaning as translated. Therefore, you should not rely on this
translation, and should cross-reference the English version, where relying on
the translated instructions could result in harm to your person or property.
Specifications subject to change without notice. For most up-to-date
version of this manual, please visit:
https://icsdiamondtools.com/customer-service-support/.
Introduction
TABLE OF CONTENTS
SAFETY RULES
SYMBOLS AND LABELS
ICS 890F4 NAMES AND TERMS
PRODUCT IDENTIFICATION
UNPACKING AND ASSEMBLY
OPERATION
MAINTENANCE
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
SERVICE CENTERS
4
8
10
12
14
21
29
33
34
35
INTRODUCTION
The 890 power cutter is designed to cut concrete, stone, and masonry when
used with the appropriate genuine ICS Diamond Chain. Ductile iron pipe may
also be cut but ONLY if using PowerGrit® Utility Chain. This is a professional
tool and is solely intended for use by trained and experienced operators. A first
time operator should obtain practical instruction before using the power cutter,
as well as reading and understanding this Operator’s Manual.
Local legislation and/or workplace standards may regulate the use of this
power cutter. Determine what regulations are applicable in the place you work
before using the power cutter.