© 2017 ICS®, Blount International Inc. REV072517 P/N 566594
890F4 OPERATOR MANUAL
17
GUIDEBAR AND DIAMOND CHAIN
INSTALLATION & TENSIONING
Unpacking & Assembly
STEP 6
Engage the tensioner pin into the
bar. Make sure all of the drive links
are inside the top and bottom bar
grooves, then pre-tension the
chain.
STEP 7
Install the bar retaining plate over
the bar studs. Assure plate is
properly oriented so "FRONT" is
facing outward (as shown).
STEP 8
Install the side cover over the
bar studs and finger tighten side
cover nuts.
FRONT
