70101419
2018-12
10
Trip Amplifier EGS80X002001
Installation and Connection
4.3 Field Device Communication via HART
In order to set the parameters of the connected HART field device, you will require
a HART communicator which you can connect to the field cables. Transmitting the HART signal
via the current output of the device is not possible.
4.4 Front Side
The following indicating and operating elements are located on the front of
the device:
• LED CHK (red) to indicate a device fault
• LED PWR (green) to indicate the presence of the supply voltage
• LED OUT 1 (yellow) to indicate that relay 1 is active
• LED OUT 2 (yellow) to indicate that relay 2 is active
• Display for indication of the measured values, fault messages and
parameterization modi
• Four keys for setting the parameters of the device:
(Up)
(Down)
ESC (Escape)
OK
• Interface for connecting a computer for parameterization and
diagnostics of the device with the parameterization software, using
a adapter
10
11
12
16
17
18
4
5
6
22
23
24
ESC
OK
7
8
9
13
14
15
1
2
3
19
20
21
RS232
CH
IN /
K
OUT
1
PWR
2
1
Summary of Contents for WIKA EGS80
