ICS Advent 486MBS Series, Product Manual

Page: 30 / 44

Manual Number: 41209-103-1 Page 2-4
486MBS Series Manual
Configuring a CD-ROM Drive
Select the appropriate drive icon (Pri Master, Pri Slave, Sec Master, or Sec Slave). Choose the
Type parameter and select CDROM. You can boot the computer from a CD-ROM drive. You can
also choose Auto and let AMIBIOS will automatically set the correct drive parameters.
Advanced Setup
Advanced Setup options are displayed by choosing the Advanced icon from the WINBIOS Setup
main menu. All Advanced Setup options are described in this section.
Quick Boot
Set this option to Enabled to instruct AMIBIOS to boot quickly when the computer is powered on.
This option replaces the old Above 1 MB Memory Test Advanced Setup option. The settings are:
Enabled and Disabled . The Optimal and Fail-Safe default settings are Enabled.
BootUp Sequence
This option sets the sequence of boot drives (floppy drive A:, hard disk drive C:, or a CD-ROM
drive) that the AMIBIOS attempts to boot from after AMIBIOS POST completes. The settings are
C:,A:,CDROM,A:,C:, CDROM : or CDROM,A:,C: The default settings are C:,A:,CDROM.
BootUp Num-Lock
Set this option to Off to turn the Num Lock key off when the computer is booted so you can use the
arrow keys on both the numeric keypad and the keyboard. The settings are On or Off. The default
settings are On.
Floppy Drive Swap
Set this option to Enabled to permit drives A: and B: to be swapped. The settings are Enabled or
Disabled. The default settings are Disabled.
Mouse Support
When this option is set to Enabled, AMIBIOS supports a PS/2-type mouse. The settings are En-
abled or Disabled. The default settings are Enabled.
System Keyboard
This option specifies that a keyboard is attached to the computer. The settings are Present or Ab-
sent. The Optimal and Fail-Safe default settings are Present.
Primary Display
This option specifies the type of display monitor and adapter in the computer. The settings are
Absent, VGA/EGA, CGA40x25, CGA80x25 or Mono . The Optimal and Fail-Safe default settings
are VGA/EGA .