background image

User Guide 

  

Obtaining Warranty Service 

To obtain warranty service, you must contact Icron Technologies 
Corporation within the warranty period for a Return Material Authorization 
(RMA) number. Be sure you have the serial number of the product before 
calling. Package the product appropriately for safe shipment and mark the 
RMA number on the outside of the package. The package must be sent 
prepaid to Icron Technologies Corporation. We recommend that you insure 
it or send it by a method that provides for tracking of the package. The 
repaired or replaced item will be shipped to you, at Icron Technologies 
Corporation’s expense, not later than thirty days after Icron Technologies 
Corporation receives the defective product. 

Address the returned product to: 

RMA Coordinator 

Scanmagnetics oy
PL 34
00811 Helsinki 

Tel:

09-2712200

Contacting Technical Support 

If you require technical assistance, send an e-mail message to: 

 [email protected] 

To help us serve you better, please include the following information with 
your technical support request: 

x

Description of the problem 

x

Host computer make and model 

x

Type of operating system installed (e.g. Win98, Mac OS X, etc.) 

x

Part number and serial number of the LEX unit and REX unit  

x

Make and model of any USB device attached to the extender 

x

Description of the installation 

Summary of Contents for USB Rover 200













Reviews: