background image

USB Rover 1300 

Thank you for purchasing the USB Rover 1300. Please read this guide 
thoroughly before installation. 

 

This document applies to part numbers: 00-00067. 

FCC Radio Frequency Interference Statement Warning 

The USB Rover 1300 has been tested and found compliant with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference when installed and operated in a commercial environment. The 
USB Rover 1300 generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with this user guide, may cause 
harmful interference to radio communications. Operation of the USB Rover 
1300 in a residential area is likely to cause harmful interference in which 
case the user will be required to correct the interference at his own expense.  

CE Statement 

We, Icron Technologies Corporation, declare under our sole responsibility 
that the USB Rover 1300, to which this declaration relates, is in conformity 
with European Standard EN 55022/A1 Class B, and EN 55024. 

IC Statement 

This Class B digital apparatus complies with Canadian ICES-003. 

 

 

 

©2003 Icron Technologies Corporation. All rights reserved. Icron 
Technologies Corporation, the Icron Technologies Corporation logo, and the 
Icron Technologies Corporation products referred to herein are either the 
trademarks or the registered trademarks of Icron Technologies Corporation. 
All other trademarks are property of their respective owners. Icron 
Technologies Corporation assumes no responsibility for errors that may 
appear in this manual. Information contained herein is subject to change 
without notice. 

 

Summary of Contents for USB Rover 1300

















Reviews: