Installation Guide
Before you can install the product, you need to prepare your site:
1.
Determine where the computer is to be located and set up the computer.
2.
Determine where you want to locate the remote desktop including the monitor, keyboard, mouse and
any other USB device(s).
3.
If you are using surface cabling, the product supports a maximum distance of 500m.
oR
If you are using premise cabling, ensure Cat 5 cabling is installed between the two locations, with Cat
5 information outlets located near both the computer and the USB device(s), and the total length,
including patch chords is no more than 500m.
Installing the Local Extender unit
1.
Place the Local Extender unit near the computer.
2.
Install the supplied USB cable to Local Extender (Type B Port), and an available USB 2.0/1.1 Type A Port
on the computer.
3.
Install the supplied DVI cable to the Local Extender (DVI-D In), and an available DVI Port on the
computer.
Installing the Remote Extender unit
1.
Place the Remote Extender unit near the monitor and USB device(s) in the desired remote location.
2.
Connect the Remote Extender DVI-D out to the monitor with a DVI cable.
3.
Plug in your USB and Audio Device(s).
8
USB extension up to 500m Cat 5 (or better) cable
