Page 4 www.icron.com Icron Systems Inc
Introduction
This manual is intended to assist IT professionals install the USB Ranger.
The instructions in this guide assume a knowledge of computer installation
procedures, familiarity with cabling requirements, and some understanding
of USB devices.
NOT E
:
Notes give additional information that could make installation
easier.
USB Ranger Product Contents
When you open your USB Ranger for the first time, you should find the
following items:
•
USB Ranger User Guide
•
Local EXtender (LEX)
•
Remote EXtender (REX) (either model 100 or 400)
•
AC power adapter (optional)
•
USB cable (2m long)
NOTE
: To complete the installation, you will also require the following
items that are not included with the product:
•
USB compatible computer
•
Category 5 Unshielded Twisted Pair (UTP) cable (up to
100m in length) with two RJ45 connectors (if using surface
cabling)
OR
Category 5 UTP cabling with two information outlets and
two Category 5 UTP patch cords with RJ45 connectors (if
using premise cabling)
•
USB device(s)
Icron Systems Inc www.icron.com Page 13
Item
USB Ranger
Models 100 and 400
Range (over Category 5 UTP)
100 meters
Host cable (USB)
Type A/B 2m
LEX connector (UTP)
RJ45
LEX connector (USB)
1 x USB Type B
REX connector (UTP)
RJ45
REX connector (USB)
Model 100 = 1 x USB Type A
Model 400 = 4 x USB Type A
LEX power
15V DC 1A
USB power at REX
Model 100 = 1 x 500mA
Model 400 = 4 x 100mA
LEX dimensions (overall)
4.0” x 3.125” x 1.4”
REX dimensions (overall)
4.0” x 3.125” x 1.4”
Temperature range
4°C to 40°C
USB Speeds
1.5 Mbps and 12 Mbps
Link cable
* Must be Category 5 UTP (or better). UTP ca-
bling must have a straight through conductor
configuration with no crossover and terminated
with 8 conductor RJ45 at both ends.
Category 5 UTP (8 conductor)
Specifications
Certifications
The USB Ranger has been certified to the following standards:
FCC Part 15 Class A
CE
USB-IF
