background image

 

PRECAUTIONS 

 

  Please read the manual carefully before the installation in order to set up the camera correctly and 

to obtain the best picture quality. 

  Please keep the manual in good condition for your future reference and service application. 

  Installation and services should only be carried out by an authorized personnel according to local 

safety regulations. 

  If any liquid or solid matter gets into the housing, immediately disconnect the camera from power 

supply and have it checked by your authorized dealer before reusing. 

  Avoid installing the camera at extremely hot or cold places. 

  If you are not a certified person, never try to dismantle the camera. 

To avoid electric shock, never remove the screws or covers. There are no parts inside that need 
maintenance by the user. All maintenance should be carried out by qualified personnel. 

  Avoid installing the camera at a place of high humidity. 

  Avoid installing the camera at the place exposed to gas or oil. 

  Keep the top glass of the lens always clean in order to obtain the best picture quality all the time.   

Be careful not to be stained by fingerprint. 

  Don't face the camera directly toward sunlight or sunlight reflecting area.   

IMAGE SENSOR may go defective at this condition. 

  Please give a special attention to keep the unit from dangerous drop or external shock during the 

process of transportation or handling. 

  Never try to touch the camera in wet hand. It may cause an electric shock. 

  Do not expose the camera to radioactivity. It causes a serious damage on the IMAGE SENSOR. 

 
 
 

LIMITATION OF LIABILITY 

 
This publication is provided “AS IS” without warranty of any kind, either express or implied, including 
but not limited to, the implied warranties of merchantability, fitness for any particular purpose, or   
non-infringement of the third party's right.   
This publication could include technical inaccuracies or typographical errors. Changes are added to 
the information herein, at any time, for the improvements of this publication and / or the corresponding 
product(s). 
 
 

 

DISCLAIMER OF WARRANTY 

 
In no event shall seller be liable to any party or any person, except for replacement or reasonable 
maintenance of the product, for the cases, including but not limited to below : 
 
(1)  Any damage and loss, including without limitation, direct or indirect, special, consequential or 

exemplary, arising out of or relating to the product; 

(2)  Personal injury or any damage caused by inappropriate use or negligent operation of the user; 
(3)  Unauthorized disassemble, repair or modification of the product by the user; 
(4)  Inconvenience or any loss arising when images are not displayed, due to any reason or cause 

including any failure or problem of the product; 

(5)  Any problem, consequential inconvenience, or loss or damage, arising out of the system 

combined by the devices of third party. 

(6)  Any claim or action for damages, brought by any person or organization being photogenic subject, 

due to violation of privacy with the result of that surveillance-camera's or video server

’s picture, 

including saved data, for some reason, becomes public or is used for the purpose other than   
surveillance. 

 
 
 

Summary of Contents for ELIP-470












Reviews: