ICRealtime ELIP-470 Quick Installation Manual Download Page 3

 

DEAR CUSTOMERS! 

By selecting this product, you have decided to use a professional device that guarantees highest 
quality and reliability. We would like to thank you very much for your confidence and kindly ask you to 
read the following instructions carefully before installation and operation in order to take full advantage 
of all quality features regarding this product. 
 
 
 
 
 
 

 

 
 

 

 
 
 
 

INFORMATION 

This equipment has been tested and found to comply with limits for a Class A digital device, pursuant 
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance 
with the instruction manual, may cause harmful interference to radio communications. Operation of 
this equipment in a residential area is likely to cause harmful interference in which case the user will 
be required to correct the interference at its own expense. 

 
 
 
 

WARNING 

Changes or modifications not expressly approved by the manufacturer could void the user’s authority 
to operate the equipment. 
 
 
 
 

CAUTION 

 To prevent electric shock and risk of the fire hazards

 

 Do NOT use power source other than that specified. 

 Do NOT expose this appliance to rain or moisture. 

 
 
 
 

TRADEMARKS 

All names used in this manual for hardware and software are probably registered trademarks of 
respective companies. 
 
 

 

The lighting flash with an arrowhead symbol, within an equilateral triangle is   
intended to alert the user to the presence of non-insulated dangerous voltage within 
the product’s enclosure that may be of sufficient magnitude to constitute a risk of   
electric shock to persons. 

The exclamation point within an equilateral triangle is intended to alert the user to 
the presence of important operating and maintenance (servicing) instructions in 
the literature accompanying the appliance. 

This installation should be made by a qualified service person and should conform to all local codes. 

CAUTION 

TO REDUCE THE RISK OF ELECTRLC SHOCK, 

DO NOT REMOVE THE COVER (OR BACK). 

NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED PERSONNEL. 

RISK OF ELECTRLC 

SHOCK 

DO NOT OPEN 

CAUTION 

Summary of Contents for ELIP-470












Reviews: