background image

 

 

I-8120W Quick Start User Guide (Version 1.2, Apr/22/2015)  -----

5

 

For Updating Firmware: 

Step7: Run the I8120W_Utility.exe. Assume the I-8120W is plugged in slot 4 of the 

WinPAC, set the slot No. to slot 4. Then, click the button “Update Firmware”.  

 

 
Step8: Use ftp or USB disk to copy the newer firmware on to the WinPAC. 
Step9: The pop-up dialog shows the information of current firmware. Click the button 

“Update”. Afterwards, select the newer file from the pop-up dialog. 

 

 

For User-defined Firmware: 

Step7: Users need to build their application of the WinPAC and the firmware of I-8120W 

firstly. Use eVC++, WinPAC SDK, I8120.lib and I-8120.h to develop the WinPAC 
application. Use TC/BC/TC++/BC++, 186COMM.lib, and 186COMM.h to develop 
the firmware of I-8120W. You can find these file in the CD or website. The path is 
show as follows: 

Website: 
eVC++: 

http://www.microsoft.com/downloads/details.aspx?FamilyId=1DACDB3D-50D1-41B2-

A107-FA75AE960856&displaylang=en

 

WinPAC SDK:

 

http://www.icpdas.com/products/PAC/winpac/download/winpac_8000/download_sdk.ht

m

 

TC++ 1.01 

http://www.icpdas.com/download/download-list.htm 

 
CD path: 
I-8120.lib and I-8120.h for eVC++: 

CAN/SlotModule/ I_8120W/Demos/WinPAC_Library 

186COMM.lib and 186COMM.h for TC/BC/TC++/BC++: 

CAN/SlotModule/ I_8120W/Demos/For_User_Defined_Firmware/Firm_Lib

 

 
 

Summary of Contents for I-8120W







Reviews: