49
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn
off the vertical and horizontal
synchronization ports and write blanks to the
video buffer.
Blank Screen
This option only writes blanks to the video
buffer.
DPMS
Initial display power management signaling.
Video Off In Suspend
This determines the manner in which the monitor is blanked.
The choice: Yes, No.
Suspend Type
Select the Suspend Type.
The choice: PWRON Suspend, Stop Grant.
MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choice: 3, 4, 5, 7, 9, 10, 11, NA.
Suspend Mode
50
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
The choice: 1Min, 2Min, 4Min, 8Min, 12Min, 20Min, 30Min, 40Min,
1Hour, Disabled.
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
The choice: 1Min, 2Min, 3Min, 4Min, 5Min, 6Min, 7Min, 8Min, 9Min,
10Min, 11Min, 12Min, 13Min, 14Min, 15Min, Disabled.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to
enter the Soft-Off state when the system has “hung.”
The choice: Delay 4 Sec, Instant-Off.
Power On by Ring
This item is Disabled or Enabled. This function can power on by ring.
The choice: Enabled, Disabled.
Resume by Alarm
This item is Disabled or Enabled. This function can wake-up system by
date or time.
PM Events
PM events are I/O events whose occurrence can prevent the system
from entering a power saving mode or can awaken the system from such
a mode. In effect, the system remains alert for anything which occurs to
