&KDSWHU-8VLQJ0LFURVRIW:LQGRZV17
9.
Now you can adjust the other system configuration parameters of your Windows NT sys-
tem (graphics adapter, mouse, etc.).
10.
Afterwards, the installation program scans the system for existing hard disks (which are
identical to the Host Drives of the GDT). Choose the drive on which to install Windows
NT and which you want to partition.
11.
Now the actual installation of the Windows NT operating system begins. Follow the in-
structions of the Windows NT installation program.
12.
After successful installation, switch the
Delayed Write
function of the ICP Controller ON
again by using the GDTSETUP program or the GDTMON program.
--
77KKH
H,,&&3
3&&RRQQWWUURROOOOHHUULLVVWWKKH
H66HHFFRRQQGGDDUU\
\&&RRQQWWUURROOOOHHUULLQ
QWWKKH
H66\\VVWWHHP
P
If you wish to use the ICP Controller as a secondary controller in your Windows NT system
(e.g. Windows NT is installed on an IDE hard disk), follow the instructions a.) to h.) below:
a)
Double click the
0\&RPSXWHU
icon.
b)
Double click
&RQWURO3DQHO
.
c)
Double click
6&6,$GDSWHUV
..
d)
Click on
'ULYHUV
.
e)
Click on
$GG
.
f)
Click on
+DYH'LVN
.
g)
Insert the GDT Windows NT driver disk and click
2.
.
h)
Select
*'76&6,'LVN$UUD\&RQWUROOHU
.
At the next system boot the GDT driver is loaded and the existing Host Drives are ready to
be partitioned under Windows NT.
--
88VVLLQQJ
JWWKKH
H++RRWW33OOXXJ
J))XXQQFFWWLLRRQ
QZ
ZLLWWK
K55$$,,'
'++RRVVWW''UULLYYHHVV
In order to be able to use the Hot Plug function under Windows NT, it is necessary to load
GDTMON, the monitoring utility program. (Note: GDTMON.EXE is part of the GDT Windows
NT Disk).
--
,,QQVVWWDDOOOODDWWLLRRQ
QRRIID
DQQHHZ
Z**''77;;66<<6
6''UULLYYHHUU99HHUUVVLLRRQQ
If it should become necessary to install a new version of the GDTX.SYS driver, the procedure
is as follows:
a)
Double click the
0\&RPSXWHU
icon.
b)
Double click
&RQWURO3DQHO
.
c)
Double click
6&6,$GDSWHUV
.
