3-7
Installing the Driver
7
When the installation is complete, remove the driver disk and
restart the computer.
8
Insert and mount the controller installation CD.
9
To enable RAID management software and utilities, type the
following commands:
cd mount-point/openserv/arc/driver/aacraid/reloc/tmp/aacraid/scripts
cp ./aacaifd /usr/sbin
cp ./S98aacaifd /etc/rc2.d
chmod 755 /usr/sbin/aacaifd /etc/rc2.d/S98aacaifd
Installing the Driver in an Existing OpenServer System
To install the driver in an existing OpenServer system:
1
Install and configure your ICP RAID controller and hard disk
drives, as described in
2
Create the driver disk, as described on
remove the driver disk.
3
Boot the server.
4
Insert the driver disk.
5
To run the
installpkg
utility, open a terminal window and type
the
installpkg
command.
OpenServer reads the disk and performs the installation.
6
Rebuild the kernel.
7
Install the new kernel by typing
y
when prompted to make it
the default kernel.
8
Restart the computer.
9
Add devices created on the RAID controller to the operating
system. For details, refer to your OpenServer documentation.
10
Insert and mount the controller installation CD.
11
To enable RAID management software and utilities, type the
following commands:
cd mount-point/openserv/arc/driver/aacraid/reloc/tmp/aacraid/scripts
cp ./aacaifd /usr/sbin
cp ./S98aacaifd /etc/rc2.d
chmod 755 /usr/sbin/aacaifd /etc/rc2.d/S98aacaifd
