ICP HMC009KD, Service Manual

Page: 42 / 83

- 42 -
2) Heating Model
⁄A
Operation display
Displays the operation conditions.
⁄B
Start/Stop Button
•
Operation starts when this button is pressed, and stops when
the button is pressed again.
•
The fan blows at low speed when start button is pressed
initially, after a while the fan speed will be reached at the
desired speed.
⁄C
Operation Mode Selection Button
Used to select the operation mode.
• Cooling Operation Mode.
• Auto Operation Mode.
• Soft Dry Operation Mode.
• Heating Operation Mode(Heat Pump Only).
⁄D
ON Timer Button
Used to set the time of starting operation.
⁄E
OFF Timer Button
Used to set the time of stopping operation.
⁄F
Time Setting Button
Used to adjust the time.
⁄G
Timer Set Button
Used to set the timer when the desired time is obtained.
⁄H
Timer Cancel Button
Used to cancel the timer operation.
⁄I
Sleep Mode Auto Button
Used to set Sleep Mode Auto Operation.
⁄J
Air Circulation Button
Used to circulate room air without cooling.
⁄K
Room Temperature Checking Button
Used to check the room temperature.
⁄L
Airflow Direction Control Button
Used to set the desired vertical airflow direction.
⁄M
Reset Button
RESET
ON
TIME
a.m.
p.m.
OFF
TIME
a.m.
p.m.
hr.
ON
OFF
SET CANCEL
1
2
9
10
3
4
5
6
7
8
12
13
11
JET
Remote Controller
Signal transmitter
Transmits the signals to the room
air conditioner.