34
Hardware Installation and User’s Guide
Flash Memory Programming
The FRUU is available from these locations:
A.2.1
Creating Firmware Diskettes from the CD-ROM Autorun
Menu
1. Insert the RAID Software Suite CD-ROM into a Windows computer.
2. After the Main Menu loads automatically, click ‘Utility Diskettes.’
3. Click ‘Firmware Recovery Utility.’ A DOS window will display prompting you to
insert a blank floppy diskette.
4. Insert the blank diskette, then press Enter.
5. After the file transfer is complete, remove the diskette from the computer and label it.
6. Insert a second blank diskette into the computer.
7. Download the latest firmware file from http://www.icp-vortex.com or http://
www.vortex.de and copy it to the second floppy diskette. Proceed to
Section A.2.3
for
information on running the FRUU.
OR
Click Firmware Diskette to get the firmware file from the RAID Software Suite CD-
ROM, then complete the remaining steps in this procedure.
8. Click ‘Firmware Diskette.’ A DOS window will display prompting you to insert a
blank floppy diskette.
9. Verify that a blank diskette is inserted, then press Enter.
Table A-1. FRUU Locations and Descriptions
FRUU Location
Summary
More Information
Run the FRUU on diskettes
created from:
• The Windows autorun
menu of the RAID
Software Suite CD-ROM
OR
• The ‘Create Diskettes’
option from the bootable
CD
Create the two diskettes described
below and then boot the computer with
diskette 1:
•
Diskette 1
—The bootable Firmware
Recovery and Update Utility
(FRUU).
•
Diskette 2
—The firmware file. You
can:
— Create the firmware diskette
from the firmware file that is on
the CD-ROM.
OR
— Download the latest firmware
file from http://www.icp-
vortex.com or http://
www.vortex.de.
• See
Section A.2.1
to create the
diskettes from the
Windows autorun
menu.
• See
Section A.2.2
to create the
diskettes from the
Bootable RAID
Software Suite
CD-ROM.
• See
Section A.2.3
for information on
running the FRUU.
Run the FRUU directly from
the bootable RAID Software
Suite CD-ROM
Boot directly from the RAID Software
Suite CD-ROM to update the firmware
image on the controller with the original
firmware file that shipped on the CD.
See
Section A.2.3
for
information on running
the FRUU.
