manualshive.com logo in svg

ICP GRD RD Series, User Manual

Share
Download
ICP GRD RD Series User Manual Download Page 71

71

9&KDQJH'ULYH1DPH

This command allows you to change the name of an Array Drive. The name serves to iden-
tify an Array Drive in GDTSETUP. This can be very helpful for configurations where several
Host Drives of various types are operated by a single controller.

9([SDQG$UUD\'ULYH

The 

Expand Array Drive

 option, which is also available online within GDTMON, includes two

functions:

1.

Migration

 of the RAID level of a given Array Drive

RAID 0 -> RAID 4 and vice versa
RAID 0 -> RAID 5 and vice versa

2.

Expansion 

of the capacity of a given Array Drive

To initiate a migration or expansion with a RAID 4/5 Array Drive, the state must be 

ready

.

The data on the Array Drive remain intact and are not affected by the expansion.
The additional capacity is introduced as new Host Drive (see next pages).
If a Logical Drive fails during the expansion, the expansion process continues until the ex-
pansion is finished. The Array Drive changes into the 

fail

 state.

In the following example the capacity of a given 400MB RAID 5 Array Drive is expanded.

Summary of Contents for GRD RD Series






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands