ICP GRD RD Series, User Manual

Page: 55 / 93

55
[""""K
VENDOR-SPECIFIC. This sense key is available for reporting vendor
specific conditions.
[""""$K
COPY ABORTED. Indicates a COPY, COMPARE, or COPY AND VERIFY
command was aborted due to an error condition on the source device,
the destination device, or both. (See 8.2.3.2 for additional information
on this sense key.)
[""""%K
ABORTED COMMAND. Indicates that the target aborted the com-
mand. The initiator may be able to recover by trying the command
again.
[""""&K
EQUAL. Indicates a SEARCH DATA command has satisfied an equal
comparison.
[""""'K
VOLUME OVERFLOW. Indicates that a buffered peripheral device has
reached the end-of-partition and data may remain in the buffer that
has not been written to the medium. A RECOVER BUFFERED DATA
command(s) may be issued to read the unwritten data from the buffer.
[""""(K
MISCOMPARE. Indicates that the source data did not match the data
read from the medium.
["""")K
RESERVED.
9'HLQLWLDOL]H'LVN
This menu option allows you to de-initialize a hard disk which has previously been initiali-
zed for use with the ICP Controller. By doing so, the specific GDT information present on
the device is removed. Obviously, the de-initialization cannot restore data that was lost
during initialization.
9/RFN8QORFN'LVN
This option is only high-lighted when you have selected a removable hard disk (e.g.,
Syquest, Iomega). Before you can initialize a cartridge you have to lock it. Before removing
it you have to unlock it.
9&RQILJXUDWLRQRI6$)7(6XEV\VWHPV
Before you can use the Auto Hot Plug with a SAF-TE subsystem, you first have to configure
the subsystem (more precisely it's intelligence, the so-called SEP - SAF-TE Enclosure
Processor).
In the following list of devices, the entry "ESG-SHV..." represents the SEP of the connected
SAF-TE subsystem. With the GDT6519RD and GDT6529RD SAF-TE is only supported on the
Ultra Wide SCSI channel.