Wilhelm-Stein-Weg 24
BIA desk/complete
© ICP Entwicklungs GmbH
22339 Hamburg
Version 2.1 - Page 31
www.icp-companies.com
Additional Information
BIA complete - Replace Paper Roll
1.
Attention
: Do not tear off too quickly or forcedly
pull paper through the printer as this can cause
damage to the printer!
2.
Open the cover of the paper roll by pressing
down the clamping lever.
3.
Pull off the fixed paper end about 10 cm and in-
sert the paper roll with the removed paper end
facing up.
4.
Close the cover and hold the paper end until the
cover is closed. Tear off the protruding paper
end at the tear bar.
BIA desk
The BIA desk is designed for use in a POS environ-
ment and has no own printer device. The BIA is
controlled by a connected POS system. It is not re-
quired to enter amount, commodity groups etc. as
these data are transmitted from the cash register
system to the BIA. Receipts will be printed on an ex-
ternal printer, e.g. on the printer connected to the
cash register system.
