ICP Electronics WAFER-5823, Manual

Page: 14 / 52

14
•
JP4: Watchdog Active Type Setting
JP4
DESCRIPTION
1-2
ACTIVATE NMI TO CPU WHEN
WDT TIME-OUT
2-3 RESET WHEN WDT TIME-OUT
OPEN DISABLE WDT
2.5 Clear CMOS Setup
If you need to clear the CMOS Setup (for example forgot the
password you should clear the setup and then set the password
again.), you should close the JP1 about 3 seconds, then open it
again. Open JP1 can set back to normal operation mode.
•
JP1: Clear CMOS Setup (Reserve Function)
JP1 DESCRIPTION
1-2 Normal Operation
2-3 Clear CMOS Setup
2.6 LCD Vcc Voltage Selector
The LCD interface connector JP5 can provide 5V or 3.3V power
supply by selecting the JP6 to meet the different LCD
requirement.
JP5 DESCRIPTION
1-2 5V
2-3
3.3V