30
Throttle Slow Clock Ratio >
to specify the speed of system
clock under power saving state. The figure is a ratio between
power conserving and normal state CPU clock.
Modem Use IO Port >
to assign a port for modem.
Modem Use IRQ >
to assign an IRQ for modem
Display Activity >
to specify if BIOS has to monitor display
activity or not.
Device X >
to monitor specified device IRQ or Ignore.
Power Button Function >
to specify how the power button on
the chassis is operated.
4.6 PCI / Plug and Play Setup
The setup helps user to handle the ROCKY-P248SV board‘ s
PCI function. All PCI bus slots on the system use INTA#, thus all
installed PCI slots must be set.
Plug and Play Aware O/S > Yes or No
When PNP OS is installed, interrupts will be reassigned by the
OS when the setting is Yes. When a non-PNP OS is installed or
to prevent reassigning of interrupt settings, select setting to No.
Clear NVRAM >
if
yes
, BIOS will auto-clear NVRAM on every
boot.
On Board PCI SCSI Controller >
to enable and disable the on
board PCI SCSI Controller
