27
Standby Time Out (Minute) >
to specify the length of the
system-idle period while the system is in full power on state.
After this period of time has ended, the system will go into
Standby state.
Suspend Time Out (Minute) >
to specify the length of the
system-idle period while the system is in Standby state. After
this period of time has ended, the system will go into Suspend
state.
Throttle Slow Clock Ratio >
to specify the speed of system
clock under power saving state. The figure is a ratio between
power conserving and normal state CPU clock.
Modem Use IO Port >
to assign a port for modem.
Modem Use IRQ >
to assign an IRQ for modem
Display Activity >
to specify if BIOS has to monitor display
activity or not.
Device X >
to monitor specified device IRQ or Ignore.
Power Button Function >
to specify how the power button on
the chassis is operated.
4.6 PCI / Plug and Play Setup
The setup help user handles the ROCKY-P218BXA board‘ s PCI
function. All PCI bus slots on the system use INTA#, thus all
installed PCI slots must be set.
Summary of Contents for ROCKY-P218BXA Pentium II & Creative Sound
Page 2: ......
